Safety & Security Starts with Eco4 3G T Series

Introducing the new Eco4 3G T series tracking devices. Superior GNSS performance, IP67 housing, 3G connectivity and wide application for safety and security.

Eco4 3G T Series

Three new tracking devices for different situations.

FM-Eco4+ 3G E T

✓ 3G/2G connectivity
✓ Rugged housing (IP67)
✓ External antenna

FM-Eco4+ 3G T

✓ 3G/2G connectivity
✓ Rugged housing (IP67)
✓ Internal antenna

FM-Eco4 light+ 3G T

✓ 3G/2G connectivity
✓ Quick installation
✓ Internal antenna

Rugged Housing

Fully waterproof and dustproof housing (IP67 certified), protects device from water, dirt and constant vibration.

The device can be installed outside the cabin (i.e. near the engine) and successfully operate. Water, dirt and other environmental factors will not affect and damage the device.

Concealed Installation

The external antenna allows device to be installed in areas, that are hard to find and access or are surrounded by metal parts.

This way device is protected from being found and intentionally removed.

In case the external antenna is disconnected or jamming activities occur, a notification is sent to the back office.

Industry Applications

Eco4 3G T series is used for fleet management solutions with a special focus on safety and security.


Automotive OEM

Trailer tracking

Rental and leasing

Corporate fleets

Combine Multiple Accessories

4xDIN, 2xAIN, 2xDOUT, 1-Wire interfaces enable to combine multiple sensors and accessories for safety and security solutions.


Ignition Blocking (kill switch)




Door Sensors


Eco-Drive Panel


Panic Button


Additional Equipment Usage

Superior GNSS Performance

Powered by premium Ublox EVA-M8M GNSS module. Highly accurate location data, quick first GPS fix and advanced features to enhance GNSS performance.

GPS + Galileo + GLONASS

Eco4 3G T series can operate in a multi-constellation mode, using GPS, GLONASS and Galileo systems at once. This way, tracking device can use more satellites for positioning and provide even more accurate coordinates.

Advanced GNSS Filters

GNSS filters eliminate inaccurate and illogical coordinates that can appear due to certain landscapes – mountainous terrain, underground parking, urban areas.


Satellite-based augmentation systems (SBAS) improve GNSSs systems performance. It improves accuracy, reliability and availability, through the integration of external information into the calculation.


Eco4 3G T series come with automatic accelerometer calibration. Use accelerometer based features such as eco-drive, roll over detection, etc.

Technical Specification

Safety & Security

  • Prevent unauthorized use
  • Remotely block vehicle engine
  • Recover stolen vehicle

Driver Behaviour Monitoring

  • Monitor driver behaviour
  • Reduce fuel consumption
  • Improve fleet safety
  • Real-time notifications for driver
  • Educate driver

Fuel Monitoring

  • Monitor fuel level
  • Prevent fuel thefts
  • Control fuel tank
  • Get accurate data with Ruptela FLS
  • Receive reports

Fleet Management

  • Increase fleet efficiency and visibility
  • Monitor and control use of fleet
  • Identify responsible drivers

Eco4 3G T series overview

  • UMTS connectivity (3G/2G)
  • IP67 housing (FM-Eco4+ 3G T & FM-Eco4+ 3G E T)
  • Built-in or external antenna (FM-Eco4+ 3G E T)
  • Built-in battery
  • 4x Digital inputs
  • 2x Analog inputs
  • 2x Digital outputs
  • 1-Wire interface
  • Mini USB and 3x indications LEDs
  • Sleep and deep sleep modes
  • Accelerometer
  • Power supply 6 ÷ 32 V DC
  • Commands and configuration via SMS/GPRS/USB (FOTA)
  • Jamming detection
  • Disconnected antenna detection (FM-Eco4+ 3G E T)
  • Size 95 x 76.4 x 28.8 mm (FM-Eco4+ 3G T & FM-Eco4+ 3G E T)
  • Size 64.5 x 61 x 22 mm (FM-Eco4 light+ 3G T)

Eco4 3G T series datasheet

Download Eco4 3G T series datasheet – All user manuals are available at

Quick installation with Power Harness

Use Power Harness to install FM-Eco4 light+ 3G T. Power Harness connects via fuse box for increased safety. Watch installation tutorial video.

Invertible DINs

Eco4 3G T series has 2x configurable (invertible) digital inputs (DINs)! This allows configuring DINs between negative and positive triggering. Negative triggering will allow easier installation of buttons, door sensors, and other accessories.

Configure trackers with ease

Configure Eco4 3G T series tracking devices with the Device Center application. Device Center is a configuration tool for Ruptela tracking devices.

Eco4 3G T series product versions:

  • FM-Eco4+ 3G T (with IP67 housing and internal antenna)
  • FM-Eco4+ 3G E T (with IP67 housing and external antenna)
  • FM-Eco4 light+ 3G T – (without IP67 housing and with internal antenna)

Request a Quote

If you have any questions, please fill in the form below and we will contact you!